由于我的tw是个带锁的，搜了下
论坛发现gonadish 的这个好帖子，感觉可行，先上个连接
http://www.tompda.com/bbs/displa ... ageNo=&luntan=1
tw可以这样解所，现在的bb不知是否也可以这样解?
以下是转贴的内容：
Tungsten W 及其他锁频
手机破解
在互联网上找到这条信息，希望对大家有帮助：
I have bought my first
palm almost 4 months ago... I never used it in Mobile Mode, because it was locked to AT&T... I'm f
rom Italy, and in Italy AT&T does not exist! So... I was very sad, I have paid 517� (
600$) for nothing useful for me (I have bought it for internet surfing and chatting).
By the way, about a week ago, I have found a TIP in SIMEMU site, when it tells about sim cloning to overcome sim locking.
If you use a Smartcard to clone your SIM (Tim is, old Vodafone is, Wind is NOT clonable) you could unlock
mobile features of Tungsten W, creating an account on the Smartcard that have the exact IMSI of the SIM card you have had, boundled with your palm!
This is the path:
1) Buy a SmartCard and a SmartCard Ripper/Writer (about 30$)
2) Download latest version of SIMEMU at
http://simemu.cjb.net/
3) Download programs to clone your SIM at
http://www.mfgware.com
4) Create your Multisim card as described in the SIMEMU site and docs
5) Extract IMSI and KI of your clonable SIM (you will not be able to find KI of NON clonable SIMs!)
6) Extract IMSI of AT&T card boundled with your Palm
7) Insert the account of your clonable SIM in the position 0 of SIMEMU
8) Insert the account of your AT&T SIM in te position 1 of SIMEMU (use IMSI extracted, fake KI, and choose a PIN you have to remember)
9) Insert the now ready MultiSIM Smartcard in your Tungsten W
10) Turn on the mobile of palm inserting the PIN of account 1
11) Registration to the network is not possible, just wait the error ；)
12) Go to SimTools of your Palm, use it to change the active number to account 0(see SIMEMU docs)
13) Go to Mobile function, then Options, then Network, choose the network of your cloned SIM
14) Registration now... is SUCCESSFUL!!!
Now you are able to use all the mobile features of your Tungsten W, with any carrier that have a clonable SIM!
Beware: Do not turn on TWO mobiles with the same Number, the network will found You as a SIM Cloner, and will call you to give some reasons...
So, be Clever!
Good Unlocking!
通过改写SIM卡信息让手机误认为是原厂卡，是不是独辟蹊径呀!请有条件的朋友试试。我有两台TW（一台锁住了），想解开。
有事PM我
中文版的相关信息：（要有SIM卡解码器）
一、算号
1、
下载软件：
http://jsxzlz.nease.net/sim/sim_scan.exe
2、详细过程请看
教程：
http://jsxzlz.nease.net/877/zcscan.htm
二、把仿真手机卡的数据
文件写入877卡
1、下载写卡软件：
http://jsxzlz.nease.net/877/ic.exe
2、下载仿真手机卡的数据文件：
877卡(64K)用文件
http://jsxzlz.nease.net/sim/Sim_Emu_4.10.exe 一卡8号，250号码薄，20
短信。
877卡(256K)用文件
http://jsxzlz.nease.net/sim/SimEmu6.01.exe 一卡10号，250号码薄，99短信。
3、详细过程请看教程：
http://jsxzlz.nease.net/877/zc877.htm
(注：1号文件是：SIM_EMU_FL_4.10.hex；2号文件是：SIM_EMU_EP_4.10.hex 无3号文件)
三、测试写好的卡片，切卡
1、下载号码薄管理软件：
http://jsxzlz.nease.net/sim/Magic.rar
2、运行：SIMManager.exe
3、把写卡器的速度设为 phoenix( 凤凰档 )，速度为：3.579
4、点击：“自卡读出 ” 。如果能读出号码说明写卡成功。
5、待读完后，把大卡切成小卡。(用带小卡的大卡，就是才办的手机卡，注意方向和正反面)
四、输入密鈅
1、把切好的小卡放入手机，开机。PIN是：一号线：1111，二号线：2222 ，三号线：3333
2、进入手机菜单的：
Sim-Emu 4.10
-- Nr.Tel/SMS
-- Config.Pos
--PINa
开机时输入的密码)
-- Posicion
选几号线1-4，你将要输入密钥的线号)
-- IMSI：(用sim_scan.exe 算出来的号，存在c:\sim_scan\imsi_ki.dat 可用记事本打开) -- KI：(用sim_scan.exe 算出来的号，存在c:\sim_scan\imsi_ki.dat 可用记事本打开) -- PUK：(设定手机的超级密码，在PIN被锁时使用，注意不要和其它线号的密码相同)
-- PINn
设定开机密码，在开机时通过它来选用不同的线号，注意不要和其它线号的密码相同)
五、Sim-Emu 4.10 菜单介绍
1.Nr.TEl/SMS (设置)
2.Informacion (版本信息)
3.Rest (重新启动手机)
from1840 编辑于 2005-12-24 13:17:13
