ymh163 2005-5-20 21:28
新版的不错，在XP下也能连接上了!:D:
收回以前对河马的怀疑!对不起，河马，是我的人品问题!:F:
neil1999 2005-5-20 22:21
版上的大哥們，請各位幫個忙，我的 Treo180 四大天王失效了，想刷回原來的 ROM 看看有沒有救，誰方便的話，寄給我一份吧。國際版最好（非大陸行貨），不過有就好，已經快走投無路要換 Treo650 了。。:crysea:
老河马 2005-5-20 22:30
[quote]neil1999 写道：
版上的大哥們，請各位幫個忙，我的 Treo180 四大天王失效了，想刷回原來的 ROM 看看有沒有救，誰方便的話，寄給我一份吧。國際版最好（非大陸行貨），不過有就好，已經快走投無路要換 Treo650 了。。:crysea:
[/quote]
找我呀，晚上加我QQ传给你。。。不过没有4大天王也死不了人吧，呵呵！
neil1999 2005-5-21 00:16
老河馬，已經 PM 給您了，請收信。我在台灣，不知道 QQ 是甚麼....:B:
ymh163 2005-5-21 00:42
按老河马的提示操作，修复刷坏ROM的270主板一块!
感谢河马的强贴!
完全响应河马的口号：今天你刷了没有!
下一步，备份一个1.12的英文ROM为刷机作准备
neil1999 2005-5-21 00:50
新版的確實可上 XP 囉！！但是，為什麼我的就是無法 Save ROM 呢？：
哪裡錯了呢？
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
checksum
Attempting to checksum 2719744 bytes at 10008000
100%
Checksum = 0xBACD which MATCHES the checksum stored in the CardHeader!
Total elapsed time: 16 seconds
Throughput: 169984 bytes/se
save "treo180.rom" 10008000 2719744
CmdSaveFile: error creating file treo180.rom
###Error saving memory to file, exiting
老河马 2005-5-21 03:13
[quote]neil1999 写道：
新版的確實可上 XP 囉！！但是，為什麼我的就是無法 Save ROM 呢？：
哪裡錯了呢？
＝＝＝＝＝＝＝＝＝＝＝＝＝＝
checksum
Attempting to checksum 2719744 bytes at 10008000
100%
Checksum = 0xBACD which MATCHES the checksum stored in the CardHeader!
Total elapsed time: 16 seconds
Throughput: 169984 bytes/se
save "treo180.rom" 10008000 2719744
CmdSaveFile: error creating file treo180.rom
###Error saving memory to file, exiting
[/quote]
错在要把2719744转换成16进制
老河马 2005-5-21 16:22
郁闷！到现在COM口连接一直没有成功，请兄弟们援手！
老河马 2005-5-24 14:35
[quote]老河马 写道：
郁闷！到现在COM口连接一直没有成功，请兄弟们援手！
[/quote]
再次求援。。偶的M100还等着呢。。。谢谢！
neil1999 2005-5-24 17:24
把2719744轉換成16進制：298000了，還是沒搞頭咧:
======================================
checksum
Attempting to checksum 2719744 bytes at 10008000
100%
Checksum = 0xBACD which MATCHES the checksum stored in the CardHeader!
Total elapsed time: 16 seconds
Throughput: 169984 bytes/se
save "treo180.rom" 10008000 298000
CmdSaveFile: error creating file treo180.rom
###Error saving memory to file, exiting
誰能給個例子吧？
haobo 2005-5-24 23:30
[quote]老河马 写道：
郁闷！到现在COM口连接一直没有成功，请兄弟们援手！
[/quote]
希望下面一段有帮助, 串口连必须设成56K.
Alternatively, if Palm Debugger is not connected or running when the device halts, you can use the [b]att[/b] command to attach Palm Debugger to the device.
--------------------------------------------------------------------------------
IMPORTANT: The debugger nub activates at 57,600 baud, and your port configuration must match this is you are connecting over a serial port. You can set the connection parameters correctly with Palm Debugger Connection menu.
After you activate the debugger nub on the handheld device, the nub prevents other applications, including HotSync®； from using the serial port. You have to soft-reset the handheld device before the port can be used.
haobo 2005-5-24 23:33
[quote]neil1999 写道：
把2719744轉換成16進制：298000了，還是沒搞頭咧:
======================================
checksum
Attempting to checksum 2719744 bytes at 10008000
100%
Checksum = 0xBACD which MATCHES the checksum stored in the CardHeader!
Total elapsed time: 16 seconds
Throughput: 169984 bytes/se
save "treo180.rom" 10008000 298000
CmdSaveFile: error creating file treo180.rom
###Error saving memory to file, exiting
誰能給個例子吧？
[/quote]
你忘了在放Palm-Debugger的目录下建子目录device.